Pressure Washing Water Tanks & Buffer Tanks – Custom Stainless Steel

Engineered Welding, Inc. fabricates custom stainless steel water tanks for pressure washing – supply tanks, buffer tanks and chemical tanks for trailers, skids and truck beds. Every tank is built to order to fit your rig, using the same TIG-welded stainless fabrication we use for OEM pressure washer tanks, in Iowa, USA.

Custom TIG-welded stainless steel tank assembly for a hot-water pressure washer, fabricated by Engineered Welding in Iowa
Example of our TIG-welded stainless steel tank fabrication

Custom-Built Pressure Washing Water Tanks

A pressure washing water tank lets you work anywhere, even where there is no hose bib or the water flow is too low for your machine. We build heavy-duty stainless steel tanks that stand up to sun, road vibration and daily commercial use – no UV cracking, no fading and easy to clean.

  • Welded 304 or 316 stainless steel construction by AWS-certified welders
  • Leak tested before it ships
  • Internal baffles to reduce water surge while driving
  • Fill lid, vent, outlet and drain fittings sized to your setup
  • Optional sight gauge, float valve and mounting feet or skid frame
  • Built to fit your trailer, skid or truck bed dimensions

What Is a Buffer Tank for Pressure Washing?

A buffer tank sits between your water source (a hose or spigot) and your pressure washer. Water fills the tank, and your pump draws from the tank instead of directly from the hose. This protects the pump when the incoming water flow is lower than your machine needs, prevents the pump from running dry, and keeps a steady supply to the gun.

Buffer Tank vs. Supply Tank

  • Buffer tank – usually smaller (often 50–100 gallons). It is refilled continuously from a hose while you work and smooths out low or uneven water flow.
  • Supply tank – larger (often 200–500+ gallons). You fill it before the job and carry all the water you need to sites with no water access.

Many contractors run a large supply tank on the trailer and use part of it as a buffer when a hose is available. We can build either style, or a combined tank with both features.

How Big of a Water Tank Do I Need for Pressure Washing?

Divide the tank size by your pump flow in gallons per minute (GPM) to see how long you can spray between refills. For a residential cleaning business, many operators choose 100–300 gallons; commercial and fleet washing rigs often run 300–500+ gallons.

Tank sizeBest forApprox. run time at 4 GPM*
50 gallonBuffer tank, small trailers≈ 12 minutes
100 gallonBuffer tank or truck bed supply≈ 25 minutes
200 gallonResidential pressure washing≈ 50 minutes
300 gallonResidential and light commercial≈ 75 minutes
500 gallonCommercial, fleet and remote sites≈ 2 hours
*Run time = tank gallons ÷ pump GPM. An 8 GPM machine uses water twice as fast.

We can build any of these sizes, or a custom capacity, to order. Remember that water weighs about 8.34 lbs per gallon – a full 300 gallon tank adds roughly 2,500 lbs, so match the tank to your trailer and axle rating.

Chemical Tanks for Soft Washing

We can build stainless steel pressure washing chemical tanks to order for soft wash mixes, detergents and degreasers. Choose 316 stainless for bleach (sodium hypochlorite) and chloride-based chemicals for better corrosion resistance.

What Is the Best Material for a Pressure Washing Water Tank?

  • Stainless steel – strongest and longest-lasting. Will not crack from UV or impacts, easy to clean and holds its value.
  • Polyethylene (plastic) – lowest upfront cost, but can crack, fade and grow algae in the sun over time.
  • Aluminum – lightweight, but less resistant to some cleaning chemicals.

Built for Pressure Washing Trailers, Skids and Truck Beds

Whether you run a single-gun trailer, a dual-pump hot water rig or a truck bed skid, we build the tank to fit your layout and mounting points – for pressure washing contractors, soft wash companies, fleet washers and trailer builders.

Made in the USA

Every tank is custom-built to order in our Iowa shop by AWS-certified welders, leak tested and shipped across the United States.

Request a Quote

Tell us the gallon size, buffer or supply tank, trailer or truck bed dimensions, fittings you need and your timeline. Photos or a sketch of your rig help us quote faster. We respond to every quote request within 3 business days.

Drag & Drop Files, Choose Files to Upload You can upload up to 3 files.

Frequently Asked Questions

How big of a water tank do I need for pressure washing?

Divide the tank gallons by your pump GPM to get run time. A 4 GPM machine empties a 100 gallon tank in about 25 minutes and a 300 gallon tank in about 75 minutes. Most residential businesses use 100–300 gallons; commercial rigs often use 300–500+ gallons.

What size buffer tank do I need for pressure washing?

Most buffer tanks are 50–100 gallons. Choose a size that holds several minutes of your pump flow so the pump never runs short when the incoming hose flow is low.

Will a pressure washer run off a water tank?

Yes. Most pressure washers run well from a tank when it is mounted so water flows by gravity to the pump inlet and the outlet and hose are sized for your pump flow. Always follow your pump manufacturer’s inlet requirements.

Do I need a pump between my tank and pressure washer?

Usually not when the tank is mounted at or above the pump inlet and the supply line is large enough. Some setups add a transfer or boost pump when the tank sits below the pump or the hose run is long – check your pump manufacturer’s recommendations.

What is the best material for a pressure washing water tank?

Stainless steel lasts the longest: it does not crack from sun or impacts, resists corrosion and is easy to clean. Plastic costs less upfront but can crack and fade over time.

Can you build a tank to fit my trailer or truck bed?

Yes. Send your trailer or bed dimensions, or a photo of your rig, and we will build the tank to fit.

How long does it take to build a custom water tank?

Lead time depends on the size, material and options. We include it with your quote, and we respond to quote requests within 3 business days.

Do you ship nationwide?

Yes. We fabricate in Iowa and ship across the United States.

Scroll to Top